Products

Contact Info

1A/3, Panchsheel CHS.,
Dr. E.Moses Road
Mumbai - 400018
 
 
Telephone   +91-22-24953892
                           +91-22-24934545
Mobile No.    +91-9869016657

Email :uttam@jeevantanclean.com.

Building Maintenance Unit

Whether you are involved in residential, industrial or office building development, taking good care of your property is the only way to secure your valuable assets. A safe, sound and clean house is essential for both landlords and tenants alike — everyone wants to make their home their castle. As business owners know, a well-maintained workplace is not only important for creating the right impression for customers; it also improves employees’ well being and efficiency, which can reduce operational costs. So make the most of your property and ensure that it remains in top condition at all times!

Roof Powered Building Maintenance Units (Gondolas)

A Building Maintenance Unit (BMU) is a form of suspended access equipment intended to be permanently installed and dedicated to a specific building or structure.

The cradle of the roof-powered BMU is lifted and lowered with 2 or 4 suspension ropes. These wire ropes are wound in a single or multi-layer drum type hoist located in the roof car machine housing. The wire ropes used for the roof-powered gondolas are classified as double-active rope suspension systems and a rope safety factor greater than 12 ensures that we comply with the EN 1808 norms.

In case of emergency, the drum hoist unit in the roof car could be manually released and the cradle safely lowered to the landing ground below.

Type : 1

track-based standard system, twin luffing jibs design with a maximum 3.4 m outreach, suitable for use on building fašades without major protrusions or recesses and with sufficient roof space to accommodate the track system as closely as possible to the parapet or along the length of the roof's edge.

Type : 2

a track-based standard system, twin luffing jibs design with a maximum 3.4 m outreach, with the track system fixed to the inside face of the parapet wall. Especially for buildings with roofs that are not suitable for bearing the track load or that have insufficient space, as well as for buildings with particularly high parapets.

Type : 3

a trackless standard system, twin luffing jibs design with a maximum 3.4 m outreach, for use on roofs with a load-bearing concrete runway. The machine moves on large sized wheels with durable polyurethane tyres, guided by guide rails or inside the parapet with rubber tyre contact rollers.

Type : 4

a track-based crane-like system with a compact design and a central jib and rotating head. Particularly suitable in cases where a medium to large outreach (up to 12.5 m) is required because of terracing or roof obstacles. A rotating head on the end of the jib allows the cradle to always travel parallel to the fašades of the building. For special requirements, this Type 4 system is also available as a trackless version, depending on the outreach and track gauge.

Type : 5

a track-based crane-like system with a compact design and a central jib and rotating head. Particularly suitable in cases where a medium to large outreach (up to 12.5 m) is required because of terracing or roof obstacles. A rotating head on the end of the jib allows the cradle to always travel parallel to the fašades of the building. For special requirements, this Type 4 system is also available as a trackless version, depending on the outreach and track gauge.