Products

Contact Info

1A/3, Panchsheel CHS.,
Dr. E.Moses Road
Mumbai - 400018
 
 
Telephone   +91-22-24953892
                           +91-22-24934545
Mobile No.    +91-9869016657

Email :uttam@jeevantanclean.com.

Suspended Platform with End stirrup

  • End Stirrups with hoists are mounted at each end of the platform
  • Maximum CE-rated platform length: 12 meter
  • Maximum distributed load: 1.260 kg
  • To ensure CE approved configurations
  • The self weight of the platform does not include the weight of the hoists, materials and personnel
  • The load must be equally distributed over the length of the platform, with a maximum point load of 300 kg/m2 (=180 kg/m).
  • compatible with adjustable angle section

Suspended Platform with walk through stirrup

Walk Through Stirrups are used when the overall platform length exceeds the distance between cables/hoists. In this case, the platform extends beyond the suspension points and creates a cantilever.
  • Maximum CE tested platform length: 18 meter
  • Maximum distributed CE-rated load: 1.080 kg
  • Cantilevers with Walk Through Stirrups need to be the same on both sides and be configured according to the table below to comply with the CE approval
  • Note the maximum distance between hoists and the maximum allowable cantilevers
  • To ensure CE approved configurations, all platforms must be assembled according to the configuration
  • The self weight of the platform does not include the weight of the hoists, materials and personnel
  • The load must be equally distributed over the length of the platform, with a maximum point load of 300 kg/m2
    (=180 kg/m)

Suspended Platform with fixed corner sections

Fixed Corner Sections

  • Light weight aluminum construction
  • Mounts to the U-frame with Quick pins
  • Supplied with Guardrails
  • Economical solution
  • Available in 4 separate angles: 30░, 45░, 60░ and 90░

Load capacity and configuration tables

Regardless of the used type or angle of corner section, the load capacity of any L-shaped platform configuration with three hoists is limited to 250kg in total. (two men with light equipment)

Suspended Platform with adjustable corner sections

The adjustable corner section can form angles from 20 to 90 degrees. Advantages of The  Adjustable Corner Section:
  • Unique in design and construction
  • Makes platform assembly and rigging easier
  • Fits together well with the rest of the suspended platform
  • Assembly by means of quick pins
  • Can make corner sections of 20, 30, 45, 51, 60, 72 and 90 degrees in order to make easy angle changes!
  • Manufactured from anti-corrosive steel combined with aluminum components
  • Can be used with a wide variety of platform configurations
  • Can be supplied with a spindle for ease of adjustment (option)
Finally, this unique adjustable corner section will allow for storage component reduction (cost saving!) compared with fixed corner sections.

Load capacity

Regardless of the used type or angle of corner section, the load capacity of any L-shaped platform configuration with three hoists is limited to 250kg in total. (two men with light equipment).

Double Deck Suspended Platform

By adding a Double Deck Kit, the standard Modular Platform system can be configured into a multi-level platform, which allows workers simultaneous access on different levels. A ladder type frame is connected at each end of the platform. By using the trapdoor in the upper deck, the workers can safely climb from one level to the other via the ladder with safety cage. The configuration of each platform level should be the same.

Advantages of the double deck kit:

  • Working on different levels simultaneously
  • Only two hoists required for lifting the complete platform
  • Minimal amount of roof rigging required
  • Standard vertical height between levels: 3m (optional adjustments available)
  • Stable construction of platform arrangement
  • Platform lengths from 3 m to 12 m (depending on lifting capacity of hoists and rigging used)
  • Ideal for applications such as cladding (siding) and glazing

Boiler Stage

he Boiler Stage is especially designed for use in enclosed spaces that cannot be accessed with standard equipment because of their size. Specifically, this applies to situations where the access entrance is in between 450 and 600mm in diameter with a maximum wall thickness of 180mm.

Characteristics of the Boiler Stage are:

  • Standard module length of 1 and 3 m
  • Distance between stirrups max. 12 m
  • Max. length 14 m (incl. two cantilevered platforms of 1 m each)
  • Max. load on cantilevered platforms 150 kg
  • Foldable decks
  • wo part stirrup, which can be placed anywhere on the platform and provides support under the deck
  • Tailor made boiler stages can be designed for nonstandard applications
  • Ideal for applications such as thermal power plants, silos & tanks

Modular Suspended Platform one-man work cage

The one-man Work Cage is the ideal solution for quick maintenance and inspection where only 1 person is required. By using a small platform and only one roof beam, the system can be (dis)assembled very quickly.
  • Maximum length: 2m
  • Provided with 1 hoist mounted to Walk Through stirrup
  • Practical solution in tight spaces